피더 32u4 데이터로거 BLE 개발보드
(Adafruit Feather 32u4 Bluefruit LE)
개요
- 본 제품은 피더 32u4 데이터로거 BLE 개발보드입니다.
- 이름처럼 깃털같이 얇고 가벼운 제품으로 32u4 데이터로거이며, 블루투스4.0 BLE 내장 UBS와 배터리 충전회로를 갖고 있습니다.
- 보드의 프로세서는 Atmega32u4로 8Mhz로 3.3V 로직으로 동작합니다.
- 32KB 플래쉬, 2K RAM을 지원하며 USB serial 프로그래밍 및 디버깅 기능을 빌트인하고 있어 FTDI칩이 필요 없습니다.
- 이동성이 중요한 프로젝트를 위해 3.7V 리튬 폴리버 배터리 커넥터를 장착하였습니다.
- USB가 연결되었을 시에는 자동으로 USB 전원으로 전환하며, 배터리 디바이더를 통해 아날로그 핀에 묶어 놓아 충전이 필요한 배터리 전압 레벨을 모니터링 할 수 있습니다.
- 제품은 생산 조립되어 테스트 후 출고되며, 탑재된 USB 부트로더를 이용하여 아두이노 IDE에서 프로그래밍이 가능합니다.
- 블루투스 모듈을 nRF51822 칩을 탑재한 제품으로 iOS나 안드로이드 장치와 통신이 가능합니다.
특징
- Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
- Light as a (large?) feather - 5.7 grams
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
- 8 x PWM pins
- 10 x analog inputs
- Built in 100mA lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button
- 51.2mm x 22.8mm x 8mm / 2" x 0.9" x 0.28"
- Weight: 5.7g
문서
- Adafruit Feather 32u4 Bluefruit LE
- BLE
- You can use our iOS App or Android App, or write your own to communicate with the UART service.
- AT command set
- GATT Services and Characteristics
- color picker
- quaternion/accelerometer/gyro/magnetometer or location (GPS)
- 8-button control game pad.
- The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID)
- Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry
- Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed.
- Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip.