goHack.me 클라우드 WiFi 쉴드 -AMW106-A02
(Mantis WiFi shield -AMW106-A02)
개요
- 본 제품은 Zentri (이전 Ackme Networks)사의 AMW106-A02 WiFi 모듈이 장착된 아두이노 WiFi 쉴드입니다.
- ACKme사의 WiConnect API 및 ARM mbed 개발환경(mbed)에서 사용이 가능하게 디자인이 된 제품입니다.
- 본 맨티스 WiFi 쉴드는 goHACK.me 를 포함한 Numbat 모듈(AMWx06 WiFi 모듈 시리즈)의 모든 기능을 지원합니다.
- Numbat 모듈은 84Mhz로 동작하며, 1MB 플래쉬를 데이터 공간으로 제공하여 각종 명령 및 제어를 실행하기 위한 매우 유연한 환경을 제공합니다.
- Numbat 모듈에서 실행되는 WiConnect 어플리케이션은 사용하기 쉬운 ASCII 명령을 제공하여 버튼 상태를 일거나 LED를 on/off 시키는 등의 명령을 쉽게 수행할 수 있습니다.
- 무료로 제공되는 클라우드 서비스인 https://goHACK.me에 가입하고 보드를 지구상 어디에서든지 접근하고 제어하여 보십오.
특징
- Plugs directly into +3.3V tolerant Arduino-compatible platforms
- USB-UART interface for a direct serial connection to the AMW106 Wi-Fi module
(This feature was not available on the AMW006 version of the Mantis board) - Dual wire whip antennas to support antenna diversity
- Separate LEDs indicate data on UART transmit/receive
- Sensor interface including two buttons and two LEDs
- System indicator LEDs show network connection state
- Manual reset switch (for the Arduino platform)
- Breakout headers and ground hooks for easy prototyping
- Powered by +3.3V from the Arduino platform
-
USB UART
Up to 5 Mbit/s with hardware flow control (optional)
Sensor interface
2 x push buttons, 2 x LEDs
Breakout header
2 x 2x10-pin header (connects to every pin on the AMW004 module)
Power supply
+5V from USB (500mA max.)
Operating Temperature
0 – 70°C
*Numbat requires WiConnect v2.00 or greater
문서
- ARG-MW106E (PDF) AMW106 Evaluation Guide
- mbed example
- ADS-MWx06-WiConnect (Numbat) (PDF) AMWx06 'Numbat' Wi-Fi Module Datasheet for use with WiConnect
- MORE RESOURCES...