포토일렉트릭 트립와이어 IR 빔 센서 10m -송신기/수신기
(Lanbao PR18S-TM10DNO Photoelectric Tripwire Sensor - 10m)
개요
- 본 제품은 IR 빔을 발사하고 수신하는 제품으로 구성되어 있는 IR 빔 센서입니다.
- 매우 안정적이고 정확한 센서로 인계선처럼 어떤 물체가 빔을 가로 막을 경우, 센서가 이것을 감지합니다.
- 센서가 형성할 수 있는 검출 거리는 약 10미터 가량으로 이 거리 이내에서 보이지 않는 IR 인계선을 설정할 수 있습니다.
특징
-
Product Specifications
Sensor Properties
Detecting Distance Max 10 m Sensor Type Through-Beam (Photoelectric) Sensor Output Switch Type NPN Normally Open Sensor Response Time Max 3 ms
Electrical Properties
Supply Voltage Min 10 V DC Supply Voltage Max 30 V DC Current Consumption Max 15 mA Protection Circuitry Surge Protection
Physical Properties
Cable Length 2 m Material PBT Operating Indicator Green LED (Emitter), Yellow LED (Reciever) IP Rating IP67 Operating Temperature Min -25 °C Operating Temperature Max 55 °C Operating Humidity Min 35 %RH Operating Humidity Max 85 %RH -
Recommended Power Supplies
- 3084 – Power Supply 12VDC 0.5A (European style plug)
- 3085 – Power Supply 12VDC 0.5A - US (North American style plug)
- 3025 – Power Supply 12VDC 2.0A (UK style plug)
- 3022 – Power Supply 12VDC 2.0A (Australian style plug)
-
Connection - Emitter
You need to provide 12VDC to the Transmitter. The brown wire is +V and the blue wire is GND.
-
Connection - Receiver
The receiver connects to any device with a Digital Input.This is how you connect the 3525 Receiver to a Phidget board that does not have 12V power such as the 1018, 1012, and 1203 using our 12VDC Power Supply:
- Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3525 Brown wire.
- Connect the 3525 Black wire to a Digital Input on the 1018.
- Connect the Power supply Ground Wire and the 3525 Blue wire to the Digital Input Ground connector on the 1018.
Note: When the 3525 Receiver is connected to a 1012, it will behave as a Normally Closed (NC) sensor instead of Normally Open (NO). You'll also need to use a pull-up resistor when using a 1012. A 1kΩ resistor between the brown and black wires will work.
For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, and 1063 all accept external power.