DC SSR(솔리드 스테이트 릴레이 ) -120V 75A
(DC Solid State Relay - 120V 75A)
개요
- 고전류 부하를 스위칭하고자 하신다면 본 SSR을 검토하여 보십시오.
- 120V/75A의 DC회로를 조용히 스위칭 할 수 있게 릴레이를 제어할 수 있습니다.
- 또 장치에 LED가 있어 릴레이 상태를 한눈에 알수 있습니다.
- 사용중 SSR이 과열된다면 적절한 방열판을 사용하여야 합니다.
- 120VDC/75A까지 스위칭이 가능한 제품이며 디지털 출력이 있는 마이크로컨트롤러 보드 등과 연결하여 SSR을 제어할 수 있습니다.
특징
-
Electrical Properties
Isolation Method Photoelectric Dielectric Strength 2.5 kV AC Control Voltage Min 3 V DC Control Voltage Max 32 V DC Load Voltage Min (DC) 5 V DC Load Voltage Max (DC) 120 V DC Load Current Max (DC) 75 A Load Surge Current 375 A Turn-on Time Max 2 ms Turn-off Time Max 2 ms
Physical Properties
Length 57 mm Width 43 mm Height 25 mm Operating Temperature Min -20 °C Operating Temperature Max 80 °C
Other Properties
Manufacturer Part Number KG1075D -
Comes Packaged with
This relay comes packaged with a heat transfer pad and a 10A02-T diode. Use the heat transfer pad whenever mounting the SSR on a heat sink or metal surface. Use the diode in parallel with your load in order to protect your SSR. For more information, see the Solid State Relay Primer.
문서
-
Connection
This relay connects to the 1012 - PhidgetInterfaceKit 0/16/16.
Just connect the positive control terminal of the SSR to the +5V terminal on the 1012, and connect the negative terminal to an open collector digital output on the 1012. Alternatively, you could connect this relay to any device with a digital output, however because of the power requirements we recommend wiring two digital outputs to the relay and switching them both simultaneously. - Data Sheet
- Download 3D Step File
- Solid State Relay Primer