AC SSR(솔리드 스테이트 릴레이 ) -280V 25A
(AC Solid State Relay - 280V 25A)
개요
- AC 솔리드 스테이트 릴레이입니다.
- 마이크로컨트롤러 보드와 같은 장치의 디지털 출력을 이용하여 280V/25A까지의 AC회로를 제어할 수 있는 제품입니다.
- 릴레이에 LED가 있어 릴레이 상태를 한눈에 알수 있습니다.
- 사용중 SSR이 과열된다면 적절한 방열판을 사용하여야 합니다.
특징
-
lectrical Properties
Isolation Method Photoelectric Dielectric Strength 2.5 kV AC Control Voltage Min 4 V DC Control Voltage Max 32 V DC Load Voltage Max (AC) 280 V AC Load Current Max (AC) 25 A Load Surge Current 260 A Turn-on Time Max 2 ms
Physical Properties
Length 57 mm Width 43 mm Height 25 mm Operating Temperature Min -20 °C Operating Temperature Max 80 °C
Other Properties
Manufacturer Part Number KD20C25AX -
Comes Packaged with
This SSR comes with a heat transfer pad and a TMOV20RP200E varistor. Use the heat transfer pad whenever mounting the SSR on a heat sink or metal surface. If you're switching a load at 120V or less, you can put the varistor across the load terminals in parallel with the rest of the load circuit in order to protect your relay from voltage spikes. If you're switching a load higher than 120V, do not use the varistor. For more information, see the Solid State Relay Primer.
문서
- This relay connects to the 1012 - PhidgetInterfaceKit 0/16/16.
Just connect the positive control terminal of the SSR to the +5V terminal on the 1012, and connect the negative terminal to an open collector digital output on the 1012. Alternatively, you could connect this relay to any device with a digital output, however because of the power requirements we recommend wiring two digital outputs to the relay and switching them both simultaneously. - Data Sheet
- Download 3D Step File
- Solid State Relay Primer