ESP8266 WiFi 모듈 -HUZZAH
(Adafruit HUZZAH ESP8266 Breakout)
개요
- ESP8266은 80Mhz의 마이크로컨트롤러로 full WiFi front-end(클라이언트 및 AP)와 DNS를 지원하는 TCP/IP 스택을 가지고 있는 제품입니다.
- 기존의 대부분의 ESP8266은 사용하기 어렵고, 브레드보드에서 사용이 쉽지 않았으며, 레귤레이터나 레벨 쉬프트 회로를 장착하고 있지 않았습니다.
- 하지만 본 제품은 ESP8266을 사용하기 쉽게 디자인하였습니다.
- 리셋버튼이 추가 되었고, 칩을 부트로딩 모드에 진입시키는 가능한 사용자 버튼, 빨강 LED, UART와 리셋핀에 레벨 변환, 3.3V 출력 500mA 레귤레이터, 다이오드로 보호되는 두개의 전원 입력(하나는 USB 케이블, 다른하나는 배터리)가 추가 되었습니다.
- 브레드보드에서 사용하기 쉽게 보드가 디자인 되어, 양쪽의 핀패드로 1개의 아날로그 입력(1.8V max), 9개의 GPIO(3.3V logic, I2C/SPI로 사용가능), 2개의 UART핀, 2개의 3-12V 전원입력, 리셋, enable, LDO-disable, 3.3V 출력을 접근 가능합니다.
- 모듈의 다른 한쪽면에는 FTDI 케이블을 연결할 수 있는 핀헤더가 있어 소프트웨어를 업로드하거나 UART를 통해 디버깅 정보를 읽고 쓸수 있습니다.
특징
- Dimensions: 25mm x 38mm x 5mm / 1" x 1.5" x 0.2"
- Weight: 5g
- Pre-programmed with NodeMCU 0.9.5 build 20150318 (Lua 5.1.4)
- ESP8266 specification sheet
- FCC test report for the module used on this breakout (Contains FCC ID: 2ADUIESP-12)
- CE test report for the module used on this breakout
- Each module comes pre-loaded with NodeMCU's Lua interpreter (NodeMCU 0.9.5 build 20150318 / Lua 5.1.4 to be specific), you can run commands, and 'save' Lua programs directly to the module's Flash using a USB-Serial converter cable. But, if you'd like, you can skip Lua and go direct to using the Arduino IDE. Once you download the ESP8266 core, you can treat it just like a microcontroller+WiFi board, no other processors needed!
문서
- Adafruit HUZZAH ESP8266 breakout
- ESP8266 Temperature / Humidity Webserver
- Adding Third Party Boards to the Arduino v1.6.4+ IDE
- Building and Running MicroPython on the ESP8266
- Huuuuge amount of information on http://www.esp8266.com/ community forum!
- NodeMCU (Lua for ESP8266) webpage with examples and documentation on the Lua framework
- Arduino IDE support for ESP8266
- Don't forget to visit esp8266.com for the latest and greatest in ESP8266 news, software and gossip!
- Our essential tutorial has wiring, pinouts, assembly, downloads, and more!