GLONASS GPS 리시버 모듈 -UBX-M8030-KT
(GNSS Receiver Module -UBX-M8030-KT)
개요
- 본 제품은 GLONASS GPS 리시버 모듈 -UBX-M8030-KT입니다.
- UBX-M8030-KT 기반으로 디자인된 제품으로 GPS와 GLONASS 위성신호를 수신할 수 있습니다.
- UART인터페이스를 가지고 있으며, 3.3V/5V 시스템과 사용이 가능합니다.
특징
-
GNSS CHIP
UBX-M8030-KT
frequency
L1, 1575.42MHz
protocol
NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS,
EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode
Default:GGA,GSA,GSV,RMC Support:VTG,GLL,TXT binary and NMEA CommandAvailable baud rate
(Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps
Receiving channel
72
Sensitivity
Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm
Cold start
29s average
Warm start time
28s average
Hot start time
1s average
Precision
HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average
Velocity: 0.1 m/s
Timepulse signal: RMS 30 nsmaximum height
18000 Meter
Maximum speed
515 m/s
Maximum acceleration
4G
Update frequency
1-10Hz(default1HZ
A-GPS
AssistNow on-line and off-line
Working output level
output level
Output TTL level
Physical characteristics
PIN
6 pin 1.0 pitch GND,VCC3.3-5V.TX.RX.PPS.EN
Dimensions
30mm * 30 mm * 8.5mm
Operating Voltage
3.3V-5.0VDC ±5%
weight
8.5g
Connector form
1.0 6 PIN
Cable length:
15 CM
Operating temperature
-40 to 85
Storage temperature
-40 to 85
- Pin description
-
NMEA
Description
GND
GND
VCC
Main power supply of the system, the power supply voltage is +3.3V~+5V, and the current consumption is about 55 mA during operation.
TXDA
UART/TTL
RXDA
UART/TTL
PPS
Time standard pulse output
EN
Power enable, high level / floating module working, low level module off