SenseCAP SOLO CO2 5000 -NDIR 이산화탄소 센서
(SenseCAP SOLO CO2 5000
- NDIR CO2 Sensor, MODBUS-RTU RS485, SDI-12)
개요
- 본 제품은 SenseCAP SOLO CO2 5000 -NDIR 이산화탄소 센서입니다.
- NDIR(nondispersive infrared)기반의 CO2 센서로 MODBUS-RTU RS485, SDI-12 프로토콜을 지원합니다.
- 5-16V 동작전압을 가지고 있으며 칼리브레이션 기능을 내장하고 있습니다.
특징
- High performance: high accuracy, fast response, and superior stability
- support MODBUS RS485 and SDI-12
- Compact size, best performance-to-price ratio
- User-friendly: fully-calibrated, easy to install and integrate
- Wide-range Power Supply: 5V ~ 16V
- Wide Range & High Accuracy: 400ppm ~ 5,000 ppm, ± (50ppm+5%*MV)
-
CO2 Range 400~5000 ppm Accuracy ± (50ppm+5%*MV)(in 400~3000ppm) Resolution 1 ppm General Parameters Product Model SOLO CO2 5000 Interface RS-485 Protocol MODBUS-RTU RS485/ MODBUS-ASCII RS485/ SDI-12 (v1.4) Response Time (T90) <5 minutes for 90% step change typical IP Rating IPx5
(the PTFE filter is not waterproof)Operating Temperature -10 ~ +50 °C Operating Humidity 0 ~ 85% (non-condensing) Cable Length 2 meters Probe Dimensions 110 * 50 * 35 mm Device Weight 300g MODBUS RS-485 Power Supply 5V ~ 16V Current Consumption Vin=16V; 22mA (typical)
Vin=12V; 28mA (typical)
Vin=9V; 34mA (typical)
Vin=5V; 57mA (typical)Warm-up Time 120s (typical) Scan Interval 1s Poll Rate 1Hz Response Time ≤ 4ms SDI-12 Power Supply 5V ~ 16V Current Consumption
(Sleep Mode)Vin=16V; 28mA (typical)
Vin=12V; 29mA (typical)
Vin=9V; 30mA (typical)
Vin=5V; 35mA (typical)Current Consumption
(Active Mode)Vin=16V; 20mA (typical)
Vin=12V; 27mA (typical)
Vin=9V; 33mA (typical)
Vin=5V; 55mA (typical)Warm-up Time 15ms Scan Interval 120s (typical)
Wiring Diagram