EL Escudo Doc -EL 와이어쉴드
(EL Escudo Dos)
개요
- 본 제품은 EL 쉴드를 좀더 업그레이드 한 제품으로 zero-crossing optoisolated triacs를 추가하여 AC와 DC사이의 완전한 절열과 노이즈를 제거하였습니다. 또 조절가능한 1.5A 선형 레귤레이터를 추가하여 정류된 DC를 외부 인버터에 공급할 수 있게 하였습니다.
- EL Escudo Dos은 아두이노 쉴드로 8개의 EL와이어를 제어할 수 있습니다. EL 와이어는 높은 전압의 AC를 가하면 밝게 빛이 나는 유연한 플라스틱 코드입니다만 고전압을 사용하여야 하기때문에 작업에 어려움이 있어왔습니다.
- El Escudo Dos는 안전하게 고전압의 AC를 on/off 스위칭하기 위한 회로를 포함하고 있어, 원하는대로 EL와이어를 이용할 수 있습니다.
- 이 제품의 사용을 위해서는 추가로 아두이노 헤더, 인버터, EL와이어가 필요할 수 있습니다.
- 쉴드의 기본 레귤레이터는 3.3V로 셋팅되어 있지만 두개의 저항을 변경하여 다른 값으로 설정할수 있으며 아두이노의 전압을 바로 인버터로 보내기 위해 솔더 점퍼를 이용하여 바이패스 시킬수도 있습니다. 아래의 튜토리얼을 참고하십시오
특징
- Eight opto-isolated, zero-crossing control channels
- No library needed - control is as easy as turning a LED on and off
- Shield is compatible with 5V or 3.3V Arduinos
- Integrated 1.5A linear regulator (LM317) to supply regulated DC power to external inverter
- Linear regulator preset to 3.3V, but can be changed via PTH resistors, or bypassed entirely
- External inverter required, not included
- Comes without headers, soldering required
문서
- Schematic
- Eagle files
- Example code
- Datasheet (MOC3063S)
- Datasheet (Z0103MN)
- Datasheet (LM317)
- Tutorial: setting up an EL system
- Jacob's Ladder Project
- Product Video