디지털 온도 센서 -STS32-DIS-10KS
(THERMO 30 CLICK)
개요
- 본 제품은 디지털 온도 센서 -STS32-DIS-10KS입니다.
- 센시리온사의 STS32-DIS-10KS 센서를 기반으로 디자인된 제품으로 -40도에서 125도까지 측정이 가능합니다.
- I2C 인터페이스를 가지고 있습니다.
특징
-
HOW DOES IT WORK?
Thermo 30 Click is based on the STS32-DIS-10KS, a third-generation, high-reliability, certified digital temperature sensor from Sensirion. Every sensor has its unique serial number and is supplied with an ISO17025-accredited calibration certificate, which comprises three temperatures: −30°C, 5°C, and 70°C. The calibration is performed on each sensor and granted by the Swiss Accreditation Service. The calibration data and the serial number are stored in the onboard memory. Temperature data can be acquired both in Single Shot and Periodic Data mode as a 16-bit temperature value. The sensor is also equipped with an internal heater that can be used for plausibility checking only and can be switched on and off through software.
The Thermo 30 Click uses a standard 2-Wire I2C interface to communicate with the host MCU with Fast mode support and frequencies up to 1MHz. The I2C address can be selected via the ADDR SEL jumper (0 set by default). The STS32-DIS-10KS can be reset via the RST pin of the mikroBUS™ socket, through a general call, or software as a soft reset. Resetting over the RST pin or through a general call (according to I2C specifications) achieves a full reset, while with the soft reset, the sensor resets the system controller and reloads calibration data from memory. In addition, the Thermo 30 Click comes with an alert function, a feature that can interrupt the host MCU over the ALR pin of the mikroBUS™ socket if there is an alarm condition. The red ALARM LED stands as a visual presentation of this feature.
This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type Temperature & humidity Applications Can be used for the development of the thermal management of portable electronics and industrial, consumer, and environmental applications On-board modules STS32-DIS-10KS - a 3rd generation certified digital temperature sensor from Sensirion Key Features Low power consumption, high precision, high reliability, long-term stability, 16-bit temperature resolution, low drift digital calibration on CMOSens® technology, high accuracy, unique serial number, and more Interface I2C Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V or 5V