부하 보호 핫 스위치 전류 제한 모듈 -HS2950P
(CURRENT LIMIT 10 CLICK)
개요
- 본 제품은 부하 보호 핫 스위치 전류 제한 모듈 -HS2950P 모듈입니다.
- HS2950P 칩을 장착하고 있으며 2.7V-29V를 입력 받아 최대 5A 출력 전류를 제공하여 줄 수 있습니다.
- 여러 fault condition 에 대응 할 수 있는 기능을 제공하고 있습니다.
- 조절가능한 전류 제한 기능, 과전압 보호기능, 자동 출력 방전, 소프트 스타트 기능을 제공합니다.
- OVP 및 UVLO 를 제외한 모든 fault에서 자동으로 재시작합니다.
특징
-
HOW DOES IT WORK?
Current Limit 10 Click is based on the HS2950P, a load protection HotSwitch from Semtech. It utilizes flexible and programmable protection features and can handle multiple fault conditions. During fault conditions, automatic output discharge will be activated, thus protecting the load, and the HS2950P will automatically restart from a fault condition. The under-voltage lockout threshold is set to the default position (2.6V). The overvoltage protection can be externally set over the OVP SEL jumper, choosing between values 5.44V, 12.36V, and 24.13V. The OVP is set by default to 5.44V.
The current limit threshold can be set over the MAX5419, a nonvolatile digital potentiometer from Analog Devices. You can also choose the onboard external resistor for a fixed 0.5A value. The selection can be made over the ILIM SEL jumper. The soft start time is set to 0.32 ms, and the turn-on delay is set to 4 ms.
Current Limit 10 Click uses a standard 2-wire I2C interface of the MAX5419 to allow the host MCU to set the limit threshold. The HS2950P will alert the host MCU when the fault condition occurs over the FLT pin, along with the FLT LED indicator. Finally, you can turn off the current limiter over the enable EN pin.
This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. Also, this Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
Type Power Switch Applications Can be used for the development of telecommunication and networking equipment, office automation equipment, consumer products, and more On-board modules HS2950P - aload protection HotSwitch from Semtech Key Features Integrated load switch, wide input voltage range, wide output current range, adjustable current limit, adjustable over-voltage protection, automatic output discharge, soft start, automatic restart from all faults except OVP and UVLO, and more Interface I2C ClickID Yes Compatibility mikroBUS™ Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V,External
문서
연관제품
- 연관제품 1