슬라이드 리니어 포센셔미터 -전압출력
(Linear Potentiometer -10Kohm)
개요
- 본 제품은 30mm 길이의 슬라이드를 가진 리니어 포텐셔미터로 포텐셔미터 위치에 따라 아날로그 전압을 출력하는 제품 입니다.
- 모듈에 장착된 포텐셔미터는 최대 10Kohm의 저항 값을 가지며 슬라이드 위치에 따라 선형으로 변하는 저항값을 가집니다.
- 본 모듈은 이렇게 가변하는 저항을 아날로그 전압 출력으로 출력할 수 있게 디자인된 제품으로 아두이노 등의 마이크로컨트롤러 보드의 아날로그 입력 포트에 연결하여 쉽게 사용할 수 있게 디자인되었습니다.
- 포텐셔미터는 뒷면에 3핀 커넥터(VCC, Gnd, Analog Voltage)를 가지고 있습니다.
- 슬라이드를 한쪽 끝으로 끝가지 밀면 0V, 다른 한쪽으로 끝까지 밀면 Vcc가 출력됩니다.
- 모듈의 네 모퉁이에는 마운팅 홀이 있어 모듈을 고정하기 쉽게하여 줍니다.
특징
- Output type :Analog voltage
- 30mm long slide length
- Linear resistance taper
-
Item Min Typical Max Unit Voltage 3.5 5.0 30 V Current - - 30 mA Dimension 20 x 60 mm Net Weight 8.3 g Rotational life >15000 cycles Total resistance 10 KΩ Stroke length 30 mm Total resistance tolerance +/- 20% /
문서
- Linear_Potentiometer Schematic.sch
- Linear_Potentiometer Schematic.brd
- 모듈의 VCC는 VCC에 Gnd는 Gnd에 Analog Voltage는 아두이노의 A0에 연결 후 아래 코드를 업로드 하여 사용할 수 있습니다.
int sensorpin=A0; int sensorValue=0; void setup() { Serial.begin(9600); } void loop() { sensorValue = analogRead(sensorpin); Serial.print("sensorValue "); Serial.println(sensorValue); }
- 결과값