아두캠 3D 캡쳐 ToF Depth 카메라 모듈
(Time of Flight Camera for Raspberry Pi)
개요
- 본 제품은 아두캠 3D 캡쳐 ToF Depth 카메라 모듈 입니다.
- 강력한 depth 및 거리 측정이 가능하며, 넓은 동작범위를 가지고 있습니다.
- 라즈베리와 MIPI-CSI2 연결로 사용이 가능하며, 최대 4미터의 측정 범위를 가지고 있습니다.
- Note: Raspberry Pi OS Bullseye is required for this camera (04/04/2022 or later releases), a fresh install is highly recommended
특징
- Pixel-level accuracy: powerful depth/distance measurement.
- Large working range: 2m/4m optional, and a 10-meter broader coverage with our cable extension kit.
- Outdoor usable: No worry of interferences from ambient light.
- Any MV library works: 3 languages applicable. C, C++ or Python
- Affordable decency: 3D imaging with primed point clouds at an unexpectedly low cost.
-
Specification
-
Packing List
1 x Arducam ToF Camera Module
1 x FPC Cable (15cm)
1 x 2-pin Dupunt CableNote:
*To use the camera on Pi Zero and 2 W, you need this.
FAQ
Is it compatible with all Raspberry Pi models?
Yes, it can work with most Pis. However, with early models, there may be performance drops.Do I need external light sources?
No, the camera has an onboard laser. (Non-intrusive, safe for the human eye.)What’s the maximum operating range?
Far Mode: 4m Near Mode: 2m
문서
-
Quick sum-up about the camera:
● Real-time point cloud and depth map.
● Resolution: 240x180@30fps on RPI4/CM4
● Up to 4M measuring distance
● Onboard 940nm laser for both indoor & outdoor uses, no external light source needed.
● V4L2-based video kernel device
● C/C++/Python SDK for userland depth map output and example source code
● ROS ready.
● 38 x 38mm board sizeDemonstration
-
Getting Started with Arducam ToF Camera
Getting Started with Arducam ToF Camera (PDF)
Point Cloud With Arducam ToF Camera
연관제품
- 연관제품 1