아두캠 USB3.0 카메라 쉴드 플러스
(ArduCAM USB3.0 Camera Shield Plus)
개요
- 본 제품은 아두캠 USB3.0 카메라 쉴드 플러스입니다.
- 최신 쉴드로 기존의 USB3.0 버전에 비해 개선된 성능 및 강화된 기능을 가지고 있습니다.
- MIPI 카메라를 직접적으로 지원하며, RAW 하드웨어 디코딩, USB3.0 전송 대역폭을 개선한 제품입니다.
- 고해상도의 지원 및 높은 프레임 레이트의 이미지 센서를 지원할 뿐아니라 stereoscopy camera 및 IRCUT control 기능을 지원합니다.
- 카메라 설정 파일을 이용하여 사용자가 서로 다른 카메라간 사용을 쉽게 할 수 있습니다.
- 카메라 테스트 및 로봇, 드론, 머신 비전 등의 어플리케이션에 적합합니다.
- 알림: 본 제품은 카메라 쉴드만 출고되며, 사진상의 카메라 등은 별도로 구매하셔야 합니다.
특징
- Support DVP camera module( 8/10/12bitPixel color depth; RAW/YUV/RGB/JPG; VSYN; PCLK)
- Support MIPI camera module( 1/2/4 Lane; RAW10/RAW12 hardware analysis; RAW/YUV/RGB/JPG )
- The maximum output bandwidth of USB3.0 is 360MB
- Build-in IRCUT control (optional)
- Provide free binary SDK library and demo software source code
- Bandwidth: 5-Gbps USB3.0 PHY
- Camera Databus: 32bit@100MHz
- I/O Voltage Standard: 3.3V
- Connector: Micro-USB3.0
- Size: 40 x 40 mm
- Weight: 10g
- Power Consumption: 5V/300mA
- Operation Temperature: -10℃~+55℃
-
Table 1 Featured Camera Modules Supported
Resolution Frame Rate Camera Module Sensor Vendor 0.3MP 100fps OV7251 (MIPI) Omnivision 0.3MP 60fps MT9V022/MT9V034 Aptina 1MP 120fps OV9281(MIPI) Omnivision 2MP 60fps OV2311/OG02B10(MIPI) Omnivision 1.3MP 50fps AR0134/AR0135 Aptina 5MP 15fps OV5647 (MIPI) Omnivision 5MP 30fps AR0521 ONSemi 9MP 7fps MT9N001 Aptina 10MP 6fps MT9J001/MT9J003 Aptina 12MP 20fps IMX477(MIPI) Sony 14MP 5fps MT9F002 Aptina 13MP 5fps OV13850 (MIPI) Omnivision 13MP 12fps IMX135(MIPI) Sony 16MP 10fps IMX298(MIIPI) Sony 18MP 8fps AR1820HS(MIPI) ONSemi 21MP 5fps IMX230(MIPI) Sony Table 2 Comparison among USB Camera Shield products
ArduCAM USB2.0 Camera Shield (Rev.E)
ArduCAM USB3.0 Camera Shield
ArduCAM USB3.0 Camera Shield Plus
DVP Camera support support(function limited) support MIPI Camera supported(1/2/4 Lane;RAW/YUV/RGB/JPG) indirect support(Arducam MIPI Adapter Board required)
support Number of MIPI Lanes 1 1 2 ( support single-lane display and dual-lane synthesis) RAW10/RAW12 Hardware Analysis not support not support support USB Interface USB2.0 USB3.0 (16 bit) USB3.0 (32 bit) USB bandwidth 40MB 180MB 360MB IR-cut Support (customization required) Support (customization required) Support (customization require -
Package Including
- 1 pcs ArduCAM USB3.0 Camera Shield Plus
- 1 pcs USB3.0 Cable
-
NOTE:
- Camera module is not included, should order separately.