위티 Pi 3 미니 RTC 및 전력 관리 모듈
(Witty Pi 3 Mini - RTC & Power Management
for Raspberry Pi)
개요
- 본 제품은 위티 Pi 3 미니 RTC 및 전력 관리 모듈입니다.
- 라즈베리 파이와 사용 가능한 제품으로 RTC (DS3231SN) 및 라즈베리 전력 관리 기능을 가지고 있는 제품입니다.
- 간단한 스크립트를 이용하여 복잡한 on/off 시퀀스를 정의 할 수 있습니다.
- 파이에 인스톨 하면 아래와 같은 기능을 이용할 수 있습니다.
- You can gracefully turn on/off Raspberry Pi with a single tap on the switch.
- After shutdown, Raspberry Pi and all its USB peripherals' power are fully cut.
- Raspberry Pi knows the correct time, even without accessing the Internet.
- Raspberry Pi knows the temperature thanks to the sensor in the RTC chip.
- You can schedule the startup/shutdown of your Raspberry Pi.
- You can even write a script to define a complex ON/OFF sequence.
- Monitor external voltage and turn on/off your Raspberry Pi accordingly.
특징
-
Each Witty Pi 3 Mini package contains:
- Witty Pi 3 Mini board x 1
- M2.5 x 10mm plastic screw x 4
- 4mm spacer x 4
- M2.5 plastic nut x 4
문서
- Diagram
- User Manual
-
Witty Pi 3 Mini supports all Raspberry Pi models that have the 40-pin GPIO header, including A+, B+, 2B, Zero, Zero W, 3B, 3B+, 3A+, and 4 B+.
Raspberry Pi communicates with the RTC chip (DS3231) on Witty Pi 3 Mini via I2C protocol. The DS3231 chip has a fixed I2C address: 0x68. Also Witty Pi 3 Mini has a micro controller (ATtiny841), which also works as an I2C peripheral, and the micro controller's I2C address is 0x69.
Witty Pi 3 Mini uses the same software as Witty Pi 3. You just need to run these two commands in your Raspberry Pi to install the software:
pi@raspberrypi:~ $ wget http://www.uugear.com/repo/WittyPi3/install.sh pi@raspberrypi:~ $ sudo sh install.sh