정전류 LED 드라이버 모듈 -WLMDU9456001JT
(LED DRIVER 11 CLICK)
개요
- 본 제품은 정전류 LED 드라이버 모듈 -WLMDU9456001JT입니다.
- 정전류 LED 드라이버 WLMDU9456001JT (172946001) 칩을 기반으로 디자인된 제품으로 450mA까지의 LED 전류를 공급할 수 있습니다.
- 4.5V-60V의 입력전압으로 동작하며, 최대 16개의 직렬 LED를 지원합니다.
- 빠른 PWM 디밍을 위해 디자인된 제품입니다.
특징
-
HOW DOES IT WORK?
LED Driver 11 Click as its foundation uses the WLMDU9456001JT (172946001), a LED driver based on a non-synchronous floating buck regulator with integrated MOSFET, integrated diode, and a power inductor able to deliver both constant and pulsed currents from Würth Elektronik. It can provide an output current of up to 450mA at an output voltage from 4.5V to 60V limited by the input voltage of the module, which must be equal to or greater than the desired output voltage for proper operation. The WLMDU9456001JT also has integrated protection circuitry to guard against thermal overstress and electrical damage featuring thermal shutdown, input undervoltage lockout, and LED short-circuit protections.
The control loop is based on a current-mode control scheme with the fixed switching frequency, assuring accurate constant current regulation and good EMI performance. The MCP4726 obtains the LED current regulation, a 12-bit digital-to-analog converter from Microchip, which can adjust the LED current up to 450mA. The MCP4726 also integrates EEPROM for storing DAC register and configuration bit values and communicates with the MCU through the I2C 2-Wire interface supporting Standard (100 kHz), Fast (400 kHz), and High-Speed (3.4 MHz) I2C modes. In addition, the WLMDU9456001JT features an integrated switch current limiting mechanism to prevent the LEDs from being overdriven.
This Click board™ offers two ways to implement the LED dimming: analog dimming and PWM dimming. Both methods control the average current flowing through the LEDs. The analog dimming can be achieved by adjusting the LED current by using an external voltage source on the VIN terminal, while the PWM dimming is implemented by direct control of the dimming control signal routed to the PWM pin on the mikroBUS™ socket. Applying a logic level PWM signal to the WLMDU9456001JT DIM pin, the user can control the brightness of the LED string. The maximum frequency of the PWM dimming signal should not exceed a frequency of 80kHz.
Additionally, the under-voltage lockout voltage divider realized with R7 and R8 is not placed. This option can be used if a particular input voltage should be present before turn on or to ensure safe turn-off of the output voltage in the event of an input voltage dip.
This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
-
Type LED Drivers Applications Can be used for color mixing and backlight application for amusement products, LED status signalization, home automation projects, and many more On-board modules WLMDU9456001JT (172946001) - fully integrated constant current LED driver with the buck switching regulator and inductor in a single package from Würth Elektronik Key Features Adjustable LED current, wide input/output voltage range, PWM/Analog dimming, integrated shielded inductor, onboard protection circuitry, and more Interface Analog,I2C,PWM Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V,External