초저전력 CMOS 이미지 센서 HM01B0 카메라 모듈 -edge 보드호환
(Himax CMOS Imaging Camera - HM01B0)
개요
- 본 제품은 Himax Imaging사의 초저전력 CMOS 이미지 센서 HM01B0 카메라 모듈입니다.
- "Always On" 카메라로 컴퓨터 비전 어플리케이션에 사용이 가능한 제품입니다.
- 제스쳐, 지능형 앰비언트 라이트 및 근접 센싱, 트래킹, 물체 확인 등의 어플리케이션에 사용이 가능합니다.
- QVGA 30FPS에서 <2mW 이상의 저전력을 소비합니다.
- 저전력 특성과 비전 어플리케이션에 사용 가능한 점은 머신러닝 Edge 컴퓨팅 보드 -음성인식, TensorFlow (SparkFun Edge Development Board - Apollo3 Blue)에 꼽아 같이 사용하기 좋게 하여 줍니다. (리본 케이블은 호환됩니다.)
- 320x320 픽셀 해상도를 가지고 있으며, 최대 60FPS의 프레임 레이트로 읽을 수 있는 320x240 윈도우 모드를 지원하며, 최대 120FPS의 프레임 레이트를 지원하는 2x2 모노크롬 binning mode 도 지원합니다.
- 비디오 데이터는 설정가능한 1비트, 4비트, 8비트 인터페이스를 통해 전송이 가능합니다.
- 센서는 black level calibration circuit, automatic exposure and gain control loop, self-oscillator and motion detection circuit with interrupt output 을 지원하여 호스트 컴퓨터의 부하를 줄여줍니다.
특징
-
Image Sensor
- Ultra Low Power Image Sensor (ULPIS) designed for Always On vision devices and applications
- High sensitivity 3.6µ BrightSenseTM pixel technology
- 320 x 320 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
- Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
- Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
- Flexible 1bit, 4bit and 8bit video data interface with video frame and line sync
- Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
- On-chip self oscillator
- I2C 2-wire serial interface for register access
- High CRA for low profile module design
Sensor Parameters
- Active Pixel Array 320 x 320
- Pixel Size 3.6 µm x 3.6 µm
- Full Image Area 1152 µm x 1152 µm
- Diagonal (Optical Format) 1.63 mm (1/11″)
- Color Filter Array Monochrome and Bayer
- Scan Mode: Progressive
- Shutter Type: Electronic Rolling Shutter
- Frame Rate MAX 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)
- CRA (maximum) 30º
Sensor Specifications
- Supply Voltage: Analog - 2.8 V, Digital - 1.5V (Internal LDO: 1.5V – 2.8V), I/O - 1.5 – 2.8V
- Input Reference Clock: 3 – 50 MHz
- Serial Interface (I2C): 2-wire, 400 KHz max.
- Video Data Interface: 1b, 4b, 8b with frame / line SYNC
- Output Clock Rate MAX: 50 MHz for 1bit, 12.5 MHz for 4bit, 6.25 MHz for 8bit
- Est. Power Consumption (include IO with 5pF load):
- QVGA 60FPS (Typical) <4 mW
- QVGA 30FPS (Typical) <2 mW