K-Type 써모커플 온도센서 및 MAX6675 앰프 -800도
(K-type Thermocouple Temperature Sensor With MAX6675 Ampilifer)
개요
- 본 제품은 K-Type 써모커플과 MAX6675 써모커플 앰프가 포함된 제품입니다.
- 0도에서 800도까지 측정이 가능한 제품으로 일반적인 온도 센서로 측정이 불가능한 고온이 측정 가능합니다.
- 써모커플 앰프의 출력은 12비트 분해능(0.25도)의 read-only 포맷으로 SPI 인터페이스입니다.
특징
- Direct Digital Conversion of Type -K Thermocouple Output
- Cold-Junction Compensation
- Simple SPI-Compatible Serial Interface
- 12-Bit, 0.25°C Resolution
- Open Thermocouple Detection
- shipping list
- K-Type Thermocouple x 1
- MAX6675 x 1
문서
- MAX6675
- 써모커플과 앰프를 연결한 후 MAX6675 모듈의 핀을 아두이노와 아래와 같이 연결합니다.
- VCC - 5V, Gnd - Gnd, SO - 핀8, CS - 핀 9, SCK - 핀 10
- 다음 링크에서 아두이노 라이브러리를 다운로드하여 설치합니다.
- 아래의 코드를 아두이노에 업로드합니다.
-
#include "Max6675.h" Max6675 ts(8, 9, 10); // Max6675 module: SO on pin #8, SS on pin #9, CSK on pin #10 of Arduino UNO // Other pins are capable to run this library, as long as digitalRead works on SO, // and digitalWrite works on SS and CSK void setup() { ts.setOffset(0); // set offset for temperature measurement. // 1 stannds for 0.25 Celsius Serial.begin(9600); } void loop() { Serial.print(ts.getCelsius(), 2); Serial.print(" C / "); Serial.print(ts.getFahrenheit(), 2); Serial.print(" F / "); Serial.print(ts.getKelvin(), 2); Serial.print(" Kn"); delay(2000); }
- 써모커플을 이용하여 온도를 측정하면 아래와 같은 결과를 확인할 수 있습니다.
연관제품
- 연관제품 1